JAE38 CM - Wildcub
Supplier Information
Name:
JA Engineering Works (Pty) Ltd
Contact:
LeezelVisser
Phone:
0113973237
Email:
leezel@jae.co.za
Website:
https://www.jae.co.za
Address:
60 Atlas Road, , Johannesburg, Gauteng, 1457
Electric drive, remote control, coal cutting machine, diagnostics, online data
| Equipment Type |
|
|---|---|
| OEM |
JA Engineering |
| TRL |
TRL9 |
| Mining Type |
Continuous Miner |
| Mine Development |
Stoping |
| Mining Activity |
None |
| Mining Method |
Mechanised |
| Mineral |
Coal |
| Energy source |
|
| Logistics & materials handling |
|
| ITComms |
|
| reefType |
|
| Total Miner Lenght: | 11.9 m |
|---|---|
| Total Miner Mass: | 75 t |
| Minimum Tramming Height: | 1.45 m |
| Width Across Main Frame: | 3.5 m |
| Ground Clearance: | 300 mm |
| Cutting Width: | 3.6 m |
| Cutter Drum Diameter: | 1180 mm |
| Minimum Cutting Height: | 1.6 m |
| Maximum Cutting Height: | 3.8 m |
| Cuttable Rock Strength (UCS. Lacing to Suit): | 70 MPa |
| Cutter Motor Power: | 2 x 150 (Continuous S1 Rating) kw |
| Loading Capacity: | 36 t/min |
| Spade Loading Width: | 3.36 m |
| Conveyor Width: | 960 mm |
| Conveyor Capacity: | 45 t/min |
| Hydraulic Oil Capacity: | 1125 L |
| Tram Speed-Variable: | 0-20 m/min |
| Ground Pressure: | 0.22 MPa |
| Total Installed Power: | 782 (1000V / 50 Hz) kw |
Related Equipment
-
Rhino Loader
To improve on the safety aspect of loading rock into a hopper in a rail bound tunnel by moving the operator away from the machine whilst loading. * Non throw action – controlled bucket lifting and discharging of rock onto a conveyor * Hopper distance sensor that stops the conveyor when the hopper is too far from the loader to prevent spillage of rock * Low operating noise level of only 78 dBa * Remote control operated with video camera feed
View more -
Narrow Tunnel Drilling Rig
To do blast hole face drilling and roof bolt holes to develop travelling ways, raises (finger raise and T raise) and gullies, furthermore to transport material and equipment along the horizontal and up to 34° in a raise, gully or travelling way and to improve on safety whereby the operator is removed from the danger area. The rig is capable of developing wide raises (T raise) of up to 8m wide.
View more -
Long Hole Drilling Rig Reef Boring Technology
To drill accurate blast holes for vent raise and ore pass development as well as drilling drain holes and cable holes from flat horizontal to 90° vertical. To accurately drill and ream holes on reef in narrow tabular ore bodies typically found in the South African Gold and Platinum mines. By doing it this way there is no need for the blasting of rock with explosives which means that mining can take place 24/7. People are not exposed to high risk areas (on the face) and roof support and scraper cleaning are not required. Dilution is minimized due to only the reef being extracted.
View more