JMRB2-HB-1.8-3.6
Supplier Information
Name:
JA Engineering Works (Pty) Ltd
Contact:
LeezelVisser
Phone:
0113973237
Email:
leezel@jae.co.za
Website:
https://www.jae.co.za
Address:
60 Atlas Road, , Johannesburg, Gauteng, 1457
Datasheets
The JMRB Roof Bolter range is a twin-boom, crawler mounted bolter with a wide range of boom movement. The JMRB range can install two roof bolts simultaneously using two operators. In addition, the outer roof bolters can be rotated over to provide rib bolting.
| Equipment Type |
|
|---|---|
| OEM |
JA Engineering |
| TRL |
TRL8 |
| Mining Type |
Roof Bolter |
| Mine Development |
Stoping |
| Mining Activity |
None |
| Mining Method |
Mechanised |
| Mineral |
Coal |
| Energy source |
|
| Logistics & materials handling |
|
| ITComms |
|
| reefType |
|
| Bolting Range: | 18 - 4.0 m |
|---|---|
| Single Pump Motor: | 90 Kw |
| Ground Pressure: | 0.126 MPa |
| Max. Platform Elevation from Ground: | 0.2 – 1.650 m |
| Max Material Hardness that can be drilled: | 10 MPa |
| Track Base: | 2715 mm |
| Drill Rig Length: | 1.3 - 2.45 m |
| Boom Height Range: | 1.6 - 3 3 |
| Drive Type: Hydraulic Track Chain | |
| Bolting Rate (Bolts/Hour): Roof Hardness Dependent | |
| Details of Failsafe Breaking Systems provided: Hydraulic Release |
Related Equipment
-
Rhino Loader
To improve on the safety aspect of loading rock into a hopper in a rail bound tunnel by moving the operator away from the machine whilst loading. * Non throw action – controlled bucket lifting and discharging of rock onto a conveyor * Hopper distance sensor that stops the conveyor when the hopper is too far from the loader to prevent spillage of rock * Low operating noise level of only 78 dBa * Remote control operated with video camera feed
View more -
Narrow Tunnel Drilling Rig
To do blast hole face drilling and roof bolt holes to develop travelling ways, raises (finger raise and T raise) and gullies, furthermore to transport material and equipment along the horizontal and up to 34° in a raise, gully or travelling way and to improve on safety whereby the operator is removed from the danger area. The rig is capable of developing wide raises (T raise) of up to 8m wide.
View more -
Long Hole Drilling Rig Reef Boring Technology
To drill accurate blast holes for vent raise and ore pass development as well as drilling drain holes and cable holes from flat horizontal to 90° vertical. To accurately drill and ream holes on reef in narrow tabular ore bodies typically found in the South African Gold and Platinum mines. By doing it this way there is no need for the blasting of rock with explosives which means that mining can take place 24/7. People are not exposed to high risk areas (on the face) and roof support and scraper cleaning are not required. Dilution is minimized due to only the reef being extracted.
View more